Note: do not use the high-resolution database for global data,as you will get streaks across your plot. This database is intendedonly for regional data.NCL alsosupports shapefiles, ifyou need to add map outlines that NCL doesn't have.Comparison of the three map resolutions available in NCL(map_resolutions.ncl)Low resolution (current NCL default)Medium resolutionHigh resolution (RANGS/GSSHS)To use this database, you must first download it from: -warnemuende.de/rangs-en.html.Oon this page you should see a table with ten *.zip files todownload: rangs(0).zip gshhs(0).zip rangs(1).zip gshhs(1).zip rangs(2).zip gshhs(2).zip rangs(3).zip gshhs(3).zip rangs(4).zip gshhs(4).zipYou must download all ten of these files, unzip them, and either putthem in the directory $NCARG_ROOT/lib/ncarg/database/rangs(which NCL will look in by default), or put them somewhere else and set theenvironment variable NCARG_RANGS to this directory. The files take upabout 140 megabytes, unzipped.Note that it is possible that after you unzip the files, therangs(n).cat and rangs(n).cel files will get put intheir own subdirectories. If this happens, you will need to move thesefiles so they are in the same directory as the gshhs(n) files.Once you have the files in the appropriate location, then in your NCLscript, you can set the mapresource mpDataBaseVersion to"HighRes" to create maps using this database. Note: you should not usethis database to plot maximal area plots, because 1) you will gethorizontal lines through your plot, and 2) it takes a long time.Application ExamplesCoastlinesMap outlinesShapefilesCode Snippets res = True ... res@mpMaxLatF = max(t&Latitude) ; zoom in on region res@mpMinLatF = min(t&Latitude) res@mpMinLonF = min(t&Longitude) res@mpMaxLonF = max(t&Longitude) res@mpDataBaseVersion = "HighRes" plot = gsn_csm_contour_map(wks,t(0,:,:),res)
I would expect this script to pass zipfile.zip for downloading. And it does, the save dialog pops up, I am choosing where to save, pressing save and zip file saves. Except one important thing - the file is with 0 bytes, it is completely empty zip file. Original zip file is full with files (around 25Mb). Maybe the size is the problem?
Update: I have tried to use function readfile_chunked as mentioned in this post: "Readfile reads 0 bytes from large file?" - the result is that zip after downloading now have some size (no longer 0 bytes) and all correct content inside it, looks like everything is ok, but the zip is invalid, and cannot be unzipped and opened normally. In Win8 when trying to open downloaded zip file I am receiving this error: The Compresed (zipped) Folder zipfile.zip is invalid.. Of course the original zip file works fine. WinRAR shows this error: zipfile.zip: Unexpected end of archive. It looks the same problem as described in this post, without any working solution.
When I check the owncloud_data/updater-data/download folder, it is empty. When I try to download -complete-20210721.zip, rename it to 10.8.0.zip and upload it into the /download folder, the updater process still fails.
The ForgeRock BackStage download site hosts downloads,including a .zip file with all of the AM components,the .war file, AM tools, the configurator, web and Java agents, Identity Gateway, and documentation.Review the Software License and Subscription Agreement presented before you download AM files.
For each release of AM, you can download the entire package as a .zip file,only the AM .war file, or only the administrative tools as a .zip archive.The Archives only have the AM source code used to build the release.
These sample trees are not installed by default on installs of AM with an external configuration store,or if you are upgrading an existing instance of AM.The sample-trees-7.2.0.zip file contains the sample trees in JSON files,\ready for import by Amster command-line interface.For information on importing files by using Amster,see Importing Configuration Datain the Amster 7.2.0 User Guide.
To specify a version, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip resulting in the following command:
To specify a version, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip resulting in the following command:
The AWS CLI installer package .zip files are cryptographically signed using PGP signatures. If there is any damage or alteration of the files, this verification fails and you should not proceed with installation.
Download the AWS CLI signature file for the package you downloaded. It has the same path and name as the .zip file it corresponds to, but has the extension .sig. In the following examples, we save it to the current directory as a file named awscliv2.sig.
For a specific version of the AWS CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip.sig resulting in the following command:
For a specific version of the AWS CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip.sig resulting in the following command:
The AWS CLI version 2 installer package .zip files are cryptographically signed using PGP signatures. If there is any damage or alteration of the files, this verification fails and you should not proceed with installation.
Driver Name: Samsung_USB_Driver_v188.8.131.52.zipDriver Version: v184.108.40.206Driver Size: 19.61 MBHow to Install: Follow GuidelinesCompatible with: Windows Computer (32-Bit and 64-Bit)